The Executive™ Waist High Turnstiles EX200-Z Download Printable Version as .pdf file.
www.TURNSTILES.us, INC. EXECUTIVE SERIES TURNSTILES AND ADA GATES
EXECUTIVE Series, Models EX200-Z, EX200-Z-ADA (Subject to change without notice.)
CABINET-STYLE, WAIST-HIGH TURNSTILES
TURNSTILE SPECIFICATION: SECTION 10450
1.00 PART I GENERAL
1.01 Drawings and general provisions as specified apply to this section.
1.02 Product Data - integrator's general description for each item and related components. For specific information, see catalog.
1.03 Shop drawings submitted upon request.
1.04 Turnstiles available in mechanical and electronic in clockwise, counter-clockwise, or bi-directional movement of travel.
2.00 PART II PRODUCTS
2.01 Turnstile models as provided by www.TURNSTILES.us, Inc., Conifer, Colorado
2.02 EXECUTIVE™SERIES
A. EX200-Z
1. Cabinet: Outer shell, inner shell 14 gauge, base 7 gauge. All materials are stainless steel, No. 4 satin finish. Top surface is solid surface material in a variety of colors provided by www.TURNSTILES.us, Inc. Template is available for unique material requirements. Arms: 1-5/16" (33mm) diameter, 12 gauge. Hub 4-1/2" (114mm) O.D. All materials are 304 stainless steel, No. 4 satin finish.
2. Control Head: Self-centering, adjustable hydraulic shock suppression, hardened tool steel locking bars, cam and roller assemblies, permanently lubricated bearings.
3. Height: 39" (991mm); Width: 36-3/4" (933mm); Base 8-7/8" (225mm).
4. Finishes: 304 stainless steel, No. 4 satin finish.
5. Keylock: Control direction of travel manually by key to lock or unlock, or may be used to override electronic controls.
6. Vertical Graphic Arrays/VGA's solid state: Nomenclature, Green arrow / Red X
7. For options, see Section 2.03.
B. EX200-Z-ADA Handicapped accessible gate
1. Cabinet: Outer shell, inner shell, 14 gauge, base 7 gauge. All materials are 304 stainless steel, No. 4 satin finish. Top solid surface material in a variety of colors provided by www.TURNSTILES.us, Inc. Template is available for unique material requirements.
2. Arm: 1-5/16" (33mm) diameter, 12 gauge. Hub 4-1/2" (114mm) O.D. All materials are 304 stainless steel, No. 4 satin finish. Arm length 36" standard. May be ordered +/- 3".
3. Control Head: Self-centering, adjustable hydraulic shock suppression, hardened tool steel locking bars, cam and roller assemblies, permanently lubricated bearings.
4. Height: 39" (991mm); Width 36-3/4" (933mm); Depth: 10-7/8" (276mm); Base: 8-7/8" (225mm).
5. Finishes: 304 stainless steel, No. 4 satin finish.
6. Keylock: Control direction of travel manually by key to lock or unlock, or may be used to override electronic controls.
7. Vertical Graphic Arrays/VGA's solid state: Nomenclature, Green arrow / Red X
8. For options, see Section 2.03 2.03 OPTIONS
A. All units available in clockwise, counter-clockwise, or bi-directional passage.
1. Electronic lock modules include heavy-duty 24 VDC pull type industrial solenoids, and card reader interface. One module for one-way control, two modules for bi-directional control. Available in each separate direction, fail-safe (open on power failure) or Fail-Lock (lock on power failure) modes.
2. Interfacing to card readers, computer attendance systems, coin and token acceptors, push buttons, and wireless remote controls.
3. Electronic 6 digit resetable counter with LCD display and ten year lithium battery.
4. Horizontal Graphic Array (HGA) Red X / Green arrow / Yellow bar. B. Additional options available on request. 3.00 PART III EXECUTION
3.01 Purchaser to install units in accordance with integrator's shop drawings and installation manual.
3.02 Warranty: Units are warranted against defects in materials and workmanship for a period of one year from date of delivery. See Warranty information for specific details.
|
www.TURNSTILES.us Turnstiles